Fabric
Workshop
Slipcover Basics Video
Slipcover FAQ's
How to:
make a cornice board. upholster
a slipseat.
make a slipcover.
- Bay-Pro -
Measurement system for Bay and Angled windows.
- DecoClips -
Fabric sales tool.
Hydroponic Growers
Bigger yields in smaller spaces.
Innovative dive and upline reels.
Firefighting Tool Back to the firehouse faster.
Steven Spielberg and Debbie Allen on location.
State of the art metal
fabrication.
New music from this legendary New England band.
Curved Back
These can be
difficult, but with care and a simple trick, you'll get a good
fit.
The key to curved backs is the tuckage. Instead of her
usual 4" tuckage, Judy cuts her seat and back as if they
had no tuck. When she has her pieces pinned, she chalks
the inside curve and adds an inch to each piece like any other
seam.
Then she makes and marks a 5" panel (4" finish) long
enough to go around the inside of the seat cushion. She
may use the full width wherever she wants tuckage or she may
taper it toward the front. As with most tucks, Judy will
locate the underlying frame. This will almost always be
the limit for tucks.
In this picture, you can see how she's tapered and pleated her
tuckage.
Hydroponic
Air Farms - Fabric Workshop - RoundTrip Reels - Lars
Mars Music- Amistad
©Copyright 1999 New Tool
Co.
Home E-mail
us.
Fabric Workshop
P.O. Box 204 Centerbrook, CT 06409
Tel. (860) 388-3769 Fax (860) 388-3203
Hydroponic Air Farms - Fabric Workshop - RoundTrip Reels - Lars Mars Music- Amistad
©Copyright 1999 New Tool Co.
Home E-mail us.
Fabric Workshop
P.O. Box 204 Centerbrook, CT 06409
Tel. (860) 388-3769 Fax (860) 388-3203